Tie Down Adjustable Angle Roller Side Guides, Pair
Item No. 316865
Tie Down Adjustable Angle Roller Side Guides, Pair is rated
out of
5 by
6.
Details
https://www.ganderoutdoors.com/tie-down-adjustable-angle-roller-side-guides-pair-316865.html
Tie Down Adjustable Angle Roller Side Guides, Pair
$90.24
$94.99
Save $4.75
(
5% Off
)
Additional Information
Features
These Adjustable Angle Roller Side Guides mount on top or beneath the trailer frame to guide your boat smoothly onto its trailer. Roller angle adjusts up to 8" to meet the angle of the hull. Hot dipped galvanized steel construction. One-piece adjustable clamp with U-bolt. Fits all channel and tube frames up to 5".
Show moreShow less
- Roller guides protect and guide your boat
- Roller angle adjusts up to 8"
- Galvanized steel construction
- One-piece adjustable clamp
- Fits channel and tube frames up to 5"
Specs
Unit Weight | 22.68 lb |
---|---|
Brand | Tie Down Engineering |
Reviews
Q & A
These Adjustable Angle Roller Side Guides mount on top or beneath the trailer frame to guide your boat smoothly onto its trailer. Roller angle adjusts up to 8" to meet the angle of the hull. Hot dipped galvanized steel construction. One-piece adjustable clamp with U-bolt. Fits all channel and tube frames up to 5".
Show moreShow less
- Roller guides protect and guide your boat
- Roller angle adjusts up to 8"
- Galvanized steel construction
- One-piece adjustable clamp
- Fits channel and tube frames up to 5"
Unit Weight | 22.68 lb |
---|---|
Brand | Tie Down Engineering |
Rated 5 out of
5
by
kenb from
Excellent launch/retrieve aid!
THESE GUIDE-ONS WORK GREAT!!!
I installed these to aim my boat onto the trailer without crashing over the fenders, etc. during windy conditions.
Installation: Awkward. Pellnuts are difficult to work with! So I drilled small holes thru shaft ends & used cotter pins & washers. I also inserted a Teflon washer above & below each bracket so the rollers roll freely.
I could NOT use the base mounting contraption, so I bolted the brackets directly to the step/frame of my trailer. Perfect fit!
I also spent a lot of time painting the yuck galvanized to a gloss black-Looks GREAT!
SO: In summary; this is a great "starter kit" to build your own custom guide-ons!!
Very satisfied!
Date published: 2016-07-02
Rated 4 out of
5
by
Tim from
Bought two - great product
Great product, ordered one, then I liked it enough to buy another for another trailer. One minor complaint - the U-bolt is very large for my 16' trailer, I should simply get narrower U-bolts for a more snug fit around the trailer frame.
Date published: 2012-09-17
Rated 4 out of
5
by
Speedo Reido from
tie Down adjustable Slide Guides
These guides are great once installed but the installation instructions are hard to follow and they should also state you need a 3/4 inch wrench and socket!!
Date published: 2014-07-22
Rated 5 out of
5
by
James from
Worked out great
Needed larger u- bolts than they offered, found larger ones that i needed and worked perfect.
Date published: 2019-10-13
Rated 2 out of
5
by
LuckyPete from
Be aware of boat size limitations. It costs a lot to ship ba
This item is well engineered, but has serious limitations in term of boat size. Id did not fit my 17' Bayliner, and there was no warning at the time of purchase. Because it is very heavy, I spent $51.00 just to send it back. I will hesitate to order again from this vendor.
Date published: 2015-08-27
Rated 5 out of
5
by
Alan from
Trailer guides
Super heavy-duty. Exceeded my dreams with thick 1/4" metal and coated with galvanized coating. This will never break or fall apart, guaranteed. They are adjustable, too.
Date published: 2019-07-30