Smith Galvanized 54" Trailer Axle Beam With 5-Bolt Hub, for 40" wide frame
Item No. 316850
Smith Galvanized 54" Trailer Axle Beam With 5-Bolt Hub, for 40" wide frame is rated
out of
5 by
5.
Images
Details
https://www.ganderoutdoors.com/smith-galvanized-54-trailer-axle-beam-with-5-bolt-hub-for-40-wide-frame-316850.html
Smith Galvanized 54" Trailer Axle Beam With 5-Bolt Hub, for 40" wide frame
$142.49
$149.99
Save $7.50
(
5% Off
)
Additional Information
Features
Replace your trailer axles with this galvanized axle beam.
• 54" overall length
• For 40" wide trailer frame
• 49" hub face length
• Spring centers: 38.5"
• 1" dia. straight spindle
• Pre-assembled with 5 stud x 4.5" bolt circle hubs
• Pre-greased with quality lithium grease and 10 lug nuts
• 1800-lb. capacity
Show moreShow less
• 54" overall length
• For 40" wide trailer frame
• 49" hub face length
• Spring centers: 38.5"
• 1" dia. straight spindle
• Pre-assembled with 5 stud x 4.5" bolt circle hubs
• Pre-greased with quality lithium grease and 10 lug nuts
• 1800-lb. capacity
- Replacement axle for 40" wide trailer frame
- 54" long end-of-spindle to end-of-spindle
- 1" diameter straight spindle
- Pre-assembled with 5 stud hubs
- 1800-lb. capacity
Specs
| Unit Weight | 27.45 lb |
|---|---|
| Brand | Smith |
Reviews
Q & A
Replace your trailer axles with this galvanized axle beam.
• 54" overall length
• For 40" wide trailer frame
• 49" hub face length
• Spring centers: 38.5"
• 1" dia. straight spindle
• Pre-assembled with 5 stud x 4.5" bolt circle hubs
• Pre-greased with quality lithium grease and 10 lug nuts
• 1800-lb. capacity
Show moreShow less
• 54" overall length
• For 40" wide trailer frame
• 49" hub face length
• Spring centers: 38.5"
• 1" dia. straight spindle
• Pre-assembled with 5 stud x 4.5" bolt circle hubs
• Pre-greased with quality lithium grease and 10 lug nuts
• 1800-lb. capacity
- Replacement axle for 40" wide trailer frame
- 54" long end-of-spindle to end-of-spindle
- 1" diameter straight spindle
- Pre-assembled with 5 stud hubs
- 1800-lb. capacity
| Unit Weight | 27.45 lb |
|---|---|
| Brand | Smith |
Rated 5 out of
5
by
loe from
great
Had to drill different holes for spring holder bolts , however my trailer is way older .. so no problem . I am pretty sure this is under rated as to weight capabilities ... my old one was rated at 2000 + lbs and not nearly as heavy-duty, mine had smaller spindles , lighter bearings,lighter axle itself ... etc....... Great product..............
Date published: 2017-07-14
Rated 4 out of
5
by
tomhath from
Okay, but check the bearings
The axle and hubs are fine. Bu the castle nuts that hold the bearings were much too tight, bearings overheated when I took it out for a test drive. They seem okay now after loosening the nuts to where they belong.
Date published: 2018-09-18
Rated 5 out of
5
by
Silvereagle from
Plug and Play
I'm very pleased with the purchase. The axle is pretty much plug and play. It came complete with hubs, lug nuts and serviced with grease. The squared design of the axle body allowed me I to drill new mounting guide holes on the opposite side of the axle to match the leaf springs peg guides of my boat trailer. I plugged the predrilled holes with epoxy for a water tight seal. The grease points on the back of the hub are a plus, discreet and accessible. I completed the job in less than an hour. Best of all, this axle is made in the USA !!
Date published: 2021-07-01
Rated 5 out of
5
by
Mickey from
Trailer axle
Great product. It fit perfectly and I got the axle for my boat trailer in just a few days of ordering. I would highly recommend Overtons.
Date published: 2021-06-16