Smart Solutions Rock Solid Tow Guard for Trucks, 18" x 34", 2 pieces
Item No. 42253
Smart Solutions Rock Solid Tow Guard for Trucks, 18" x 34", 2 pieces is rated
out of
5 by
21.
Images
Details
https://www.ganderoutdoors.com/smart-solutions-rock-solid-tow-guard-for-trucks-18-x-34-2-pieces-42253.html
Smart Solutions Rock Solid Tow Guard for Trucks, 18" x 34", 2 pieces
$116.86
$189.99
Save $73.13
(
38% Off
)
Additional Information
Features
The Rock Solid Tow Guard is the effective way to reduce the costly damage that road debris can cause to your towed vehicle. Rock Solid Guards are made of exhaust heat resistant rubber. This new material is 3/8" thick vulcanized molded rubber that is impervious to extreme exhaust heat and won't melt or deform. The Rock Solid design allows air to flow through the vented flaps to allow flexibility and prevent heat build-up, but it's sturdy enough to stop rocks or small road debris. These Rock Solid Guards install on the hitch insert of most 2" and 2-1/2" receiver hitches and can be easily taken on and off. All mounting hardware is included.
This Rock Solid Protective Guard consists of two 18"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
Show moreShow less
This Rock Solid Protective Guard consists of two 18"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
- New exhaust heat resistant rubber material
- Protects towed vehicles from road debris
- Vented flaps allow flexibility and prevent heat build-up
- Easily installed on the hitch insert of most 2" and 2-1/2" receiver hitches
- Two 18"H x 34"L pieces
Specs
| Unit Weight | 27.00 lb |
|---|---|
| Brand | Smart Solutions |
| MFG Part No. | 01868 |
Reviews
Q & A
The Rock Solid Tow Guard is the effective way to reduce the costly damage that road debris can cause to your towed vehicle. Rock Solid Guards are made of exhaust heat resistant rubber. This new material is 3/8" thick vulcanized molded rubber that is impervious to extreme exhaust heat and won't melt or deform. The Rock Solid design allows air to flow through the vented flaps to allow flexibility and prevent heat build-up, but it's sturdy enough to stop rocks or small road debris. These Rock Solid Guards install on the hitch insert of most 2" and 2-1/2" receiver hitches and can be easily taken on and off. All mounting hardware is included.
This Rock Solid Protective Guard consists of two 18"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
Show moreShow less
This Rock Solid Protective Guard consists of two 18"H x 34"L pieces that mount to the receiver hitch of your truck. Trim or eliminate strips to accommodate mufflers, hitches, or wiring. Mounting brackets are galvanized steel.
Measuring Instructions: Measure from bumper to ground and subtract 4" to determine correct height.
- New exhaust heat resistant rubber material
- Protects towed vehicles from road debris
- Vented flaps allow flexibility and prevent heat build-up
- Easily installed on the hitch insert of most 2" and 2-1/2" receiver hitches
- Two 18"H x 34"L pieces
| Unit Weight | 27.00 lb |
|---|---|
| Brand | Smart Solutions |
| MFG Part No. | 01868 |
Rated 1 out of
5
by
Craig from
Not durable
The angle iron is too thin and flimsy I install the system driving through three states to pick up a trailer and never even made it they broke at the angle iron and came off somewhere on the freeway when I got there there was no guard left
Date published: 2020-07-03
Rated 4 out of
5
by
Sixgun from
Good....with a little tweaking.
Good quality and good price point. Instructions dont even mention installing without the riser, as needed, and doesn't come with short bolts to do so, even though pictured as an option on the box. Should also have means to adjust the width. Its a few inches narrower than my tires reach.
Date published: 2020-06-15
Rated 1 out of
5
by
Frank from
Flaps are not long enough
The flaps do not cover the tires. I have a 2004 Dodge 2500 with stock tires and rims . The flaps only cover about 1/4 of the tire tread. Will need to buy addition steel to cover all of the tires. Also holes are not punched all the way thru the flaps. Would not recommend for a full size truck. What is pictured is not what you get.
Date published: 2020-08-10
Rated 3 out of
5
by
George from
Smart solutions rock solid guard had to be mod.
Didn't fit trailer hitch like it should have. I had to install spacer between the trailer mount the cross bar that holds the flaps. This was done to make the hole big enough to fit the hitch into it.
Date published: 2020-08-25
Rated 5 out of
5
by
David from
Super easy to install
This was super easy to put together and even easier to install. Requires no bumper modifications. Mounts directly to hitch. Slides right on and off easy.
Date published: 2020-09-14
Rated 3 out of
5
by
Dennis from
Fitment problems
Bolt holes were not open. A real pain to get them open. May have a mold problem in manufacturing this product ?
Date published: 2021-03-05
Rated 3 out of
5
by
Timothy from
Need more mounting options
Fairly nice product but the mount wont work with alot of hitches. I had to buy a light hitch so that it would work. If your hitch has a gusset it wont work
Date published: 2020-08-19
Rated 3 out of
5
by
Stone guards from
Stone guards
The mudflaps our it’s pretty good product but they need to be wider only cover about half of my wheels working on rebuilding now and making them wider
Date published: 2021-06-21