Shademate Bimini Top 3-Bow Aluminum Frame Only, 6'L x 46"H, 79"-84" Wide
Item No. 322895
Shademate Bimini Top 3-Bow Aluminum Frame Only, 6'L x 46"H, 79"-84" Wide is rated
out of
5 by
10.
Images
Details
https://www.ganderoutdoors.com/shademate-bimini-top-3-bow-aluminum-frame-only-6l-x-46h-79-84-wide-322895.html
Shademate Bimini Top 3-Bow Aluminum Frame Only, 6'L x 46"H, 79"-84" Wide
$159.99
$184.99
Compare at $219.00
Save $25.00
(
14% Off
)
Additional Information
Features
Designed for a better fit with a much easier setup and installation, this bimini top frame is built tough using only the finest materials. Screws used in the assembly of this frame are placed so as not to contact the fabric, so there is less wear and tear. This 7/8" bright anodized aluminum frame comes with stainless steel screws. Nylon deck mounts swivel to allow various mounting options. Mounting hardware and straps are included.
Show moreShow less
- 7/8" anodized aluminum frame
- Heavy-duty nylon fittings and deck mounts
- Stainless steel screws
Specs
| Bimini Type | Standard |
|---|---|
| Bimini Width | 79"-84" |
| Bows | 3 |
| Frame Type | Aluminum |
| Height (in.) | 46.00 in |
| Length | 6' |
| Unit Weight | 15.00 lb |
| Brand | Shademate |
Reviews
Q & A
Designed for a better fit with a much easier setup and installation, this bimini top frame is built tough using only the finest materials. Screws used in the assembly of this frame are placed so as not to contact the fabric, so there is less wear and tear. This 7/8" bright anodized aluminum frame comes with stainless steel screws. Nylon deck mounts swivel to allow various mounting options. Mounting hardware and straps are included.
Show moreShow less
- 7/8" anodized aluminum frame
- Heavy-duty nylon fittings and deck mounts
- Stainless steel screws
| Bimini Type | Standard |
|---|---|
| Bimini Width | 79"-84" |
| Bows | 3 |
| Frame Type | Aluminum |
| Height (in.) | 46.00 in |
| Length | 6' |
| Unit Weight | 15.00 lb |
| Brand | Shademate |
Rated 3 out of
5
by
AJS from
Good quality material but hardware is cheap
Purchased the Sunbrella 3 bow bimini and while I'm happy with the top material the nylon mounting hardware is horrible. While unpackaging the hardware, the hinge pin on the nylon bracket actually fell out. I mounted the hinge but thought better afterward and ordered a stainless hinge from another site since these aren't available from Overtons. Overall I'm happy with the bimini but surprised they would sell this top with such cheap mounting hardware. Must say Overton's return policy is excellent as my original top choice was returned with no issue because the color was not what I expected.
Date published: 2016-07-04
Rated 3 out of
5
by
John Wagner from
It's a good value
This was one of the least expensive options, but seems like a decent value. The fabric seems to be a good quality with excellent seams and zippers, It is stable at speed and I think it will last a long time if we are gentle with it. The fabric seemed too narrow and too short for the frame. It was tight at the sides, but a little loose in the center. I put pool noodles around the center of the bows which tightened it up pretty well.
Date published: 2020-08-24
Rated 2 out of
5
by
Love the water from
Somewhat bimini
Not happy with this Bimini. The cloth doesn’t come down far enough on the sides. One outing and one of the plastic pivot pieces broke. We are older folks and do not drive fast as well. Material is very good, but the poles for the amount paid are thin and cheap compared to others we have bought in the past at overtons.
Date published: 2021-06-15
Rated 2 out of
5
by
chesepeake boatman from
not impressed==do not buy
I have only used this top once. I had to hold the bar when driving in the boat at 25mph. Way more unstable than the unit i replaced. The back wabbled so bad I thought it was going to break and I bought the support rods.
Date published: 2017-07-19
Rated 4 out of
5
by
Martooniman from
sun protection long overdue
Just purchased and installed at the end of boating season, so haven't had chance to use on water yet. Hoping aluminum is strong enough, as opposed to stainless. I had purchased the top material separately.
Date published: 2012-11-02
Rated 5 out of
5
by
Mark from
Confused
Just received via mail and to my surprise I see " Taylor made " on the fabric tag....the description says it is a sunbrella brand fabric.. am I missing something?
Date published: 2017-06-15
Rated 4 out of
5
by
Brian from
Shade mate Bimini
This top was just what we’ve been looking for. It was easy to assemble and install. The fabric is sewn nicely. It was very affordable as well. Very happy so far.
Date published: 2020-08-19
Rated 5 out of
5
by
Clint from
Fits perfectly
This Bimini top fit exactly as I hoped it would. It also looks great on the boat.
Date published: 2016-08-13
How do you measure the frame? With it open like it would be set up on the boat or closed ( in Boot) ? the height is a big differnce. Thanks
You would measure the height with it open just like it would be installed. For example this particular frame is 46" high so if your transom, or mounting point, is 30" then you would have 76" of clearance under the bimini top.
Date published: 2015-09-23