Lippert Radius Manual Steps, Double Step
Item No. 94080
Lippert Radius Manual Steps, Double Step is rated
out of
5 by
20.
Images
Details
https://www.ganderoutdoors.com/lippert-radius-manual-steps-double-step-94080.html
Lippert Radius Manual Steps, Double Step
$106.25
$133.09
Save $26.84
(
20% Off
)
Additional Information
Features
This is a manually-operated RV step that makes it easy to get into and out of your motor home.
Radius step design eliminates sharp corners. Made to allow user to extend and retract steps with one hand. Black powder-coat finish protects step from the elements.
Step dimensions: 24-1/4" wide x 8-1/4" deep. Weight capacity: 300 lbs
Show moreShow less
Radius step design eliminates sharp corners. Made to allow user to extend and retract steps with one hand. Black powder-coat finish protects step from the elements.
Step dimensions: 24-1/4" wide x 8-1/4" deep. Weight capacity: 300 lbs
- 24" width on all steps; standard for RV industry
- Anti-skid tape on each step secures footing
- 7" drop/rise
- Sturdy, steel construction
Specs: - Entry height: 15-1/2"
Specs
| Frame | Powder-Coated |
|---|---|
| Step Drop | 7.00 in |
| Weight Capacity | 300.00 lbs |
| Unit Weight | 32.65 lb |
| Brand | Lippert Components Inc |
| MFG Part No. | 432682 |
Reviews
Q & A
This is a manually-operated RV step that makes it easy to get into and out of your motor home.
Radius step design eliminates sharp corners. Made to allow user to extend and retract steps with one hand. Black powder-coat finish protects step from the elements.
Step dimensions: 24-1/4" wide x 8-1/4" deep. Weight capacity: 300 lbs
Show moreShow less
Radius step design eliminates sharp corners. Made to allow user to extend and retract steps with one hand. Black powder-coat finish protects step from the elements.
Step dimensions: 24-1/4" wide x 8-1/4" deep. Weight capacity: 300 lbs
- 24" width on all steps; standard for RV industry
- Anti-skid tape on each step secures footing
- 7" drop/rise
- Sturdy, steel construction
Specs: - Entry height: 15-1/2"
| Frame | Powder-Coated |
|---|---|
| Step Drop | 7.00 in |
| Weight Capacity | 300.00 lbs |
| Unit Weight | 32.65 lb |
| Brand | Lippert Components Inc |
| MFG Part No. | 432682 |
Rated 5 out of
5
by
JR in PA from
Great steps!
These steps have really helped me enjoy my camper. I can now get up into the camper and out with ease. It was easy to put on, but hubby needed my help to hold it up while he tightened the bolts. Works great!
Date published: 2020-06-27
Rated 5 out of
5
by
Bill from
Lippert Radius Manual Steps, Double Step
As easy as it gets. Lifted the trailer and needed to go from a single step to a double step.
Date published: 2021-06-08
Rated 4 out of
5
by
RussBee from
Low price, easy to install
I don't have big money for fancy stepa and needed a two stepper because my factory equipped one step was too high. I put this on a Forest River 261BHXL which is a pretty common floor plan among campers. When installed and folded up I still have 10 inches ground clearance. Quality wise it is about the one like I replaced. If they rust I'll refinish them.
Date published: 2019-09-14
Rated 4 out of
5
by
ScottS from
Excellent bolt-on replacement
Works great, simple bolt-on replacement for the original steps stupidly destroyed when we left them down while driving. Would give 5 stars except that the folding mechanism - which works fine - just isn't as nice as the originals, which had a linkage system rather than the slot and slider on these.
Date published: 2021-08-05
Rated 1 out of
5
by
Anonymous from
Bent steps
Upon receiving the steps they were tweaked and would not work. On the bottom side it looked like it had been hit with a hammer. I was able to bend them back with a ratchet strap, still takes quite a bit of manoeuvring to get them open and closed.
Date published: 2020-10-29
Rated 5 out of
5
by
RL Ross from
Terrific upgrade for our restore project!
Excellent fitment, appearance, durability and functionality! We are restoring a 2006 Jayco 29' pull-behind camper. The overall usability and quality of the Lippert steps far exceeds that of the factory unit!
Date published: 2020-10-06
Rated 1 out of
5
by
Steve from
Bent with no box damage
Like the steps, came in twisted, box has no damage but somehow steps were pretty bent up. I managed to straighten them for the most part and are now useable. Although still crooked.
Date published: 2020-06-17
Rated 5 out of
5
by
Andrew S from
Solid replacement steps
The steps were easy to install with 2 people. The steps are attached with the existing bolts of the old steps. The new steps bolts holes matched the old bolts holes.
Date published: 2021-05-05