5 0
CURT Receiver Tubing, 2'' x 2'' opening; 9'' in length
Item No. 92748
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 65ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Images
CURT Receiver Tubing, 2'' x 2'' opening; 9'' in length
Details

CURT Receiver Tubing, 2'' x 2'' opening; 9'' in length

  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getAggregateRating, 39ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};
Item No. 92748
$13.01 $23.99
Save $10.98 ( 46% Off )
Clearance See Details
Product Actions

This item is currently not available.

Additional Information
CURT fabrication steel receiver tubing can be used to extend the reach of your receiver or to create a piece of custom towing equipment.

Each unit is equipped with a 1/2" reinforcing collar for extra strength and has a raw finish to be ready for welding.

Show moreShow less
  • Accepts any 2" x 2" ball mount shank
  • 1/2" reinforcing collar for increased strength
  • Raw finish allows for immediate welding
  • Features a pre-drilled hitch pin hole
  • Made in USA
Unit Weight 6.00 lb
Brand Curt Manufacturing
MFG Part No. 49090
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getReviews, 38ms
  • reviews, product
  • bvseo-msg: Unsuccessful GET. status = '{0}', msg = {1};

Is there a compatable replacement for the LST-3 thru hull transducer?

Asked by: Bert
Lowrance PD-WSU (Navico# 000-0106-52) is a replacement shoot thru hull transducer.
Answered by: Anonymous
Date published: 2015-09-23

Will this work with a P-79 Airmar in-hull transducer?

Asked by: Kiko
Thank you for your question. According to Lowrance this product does not work with the P-79
Answered by: Anonymous
Date published: 2015-09-23

Will this work in shallow water? We fish in five feet or less. Will it inter fear with other depth finders on board?

Asked by: Bill
Thank you for your question. This will work in shallow water--and should work in less than 5ft. Please keep in mind that all sounders regardless of mfg often begin to read erratically in water under 5ft due to the sonar beams bouncing back at the unit so quickly. This unit may possibly interfere with other units onboard if they all use the same sonar frequency at the same time.
Answered by: Anonymous
Date published: 2015-09-23

is the transducer glued to the floor of the boat, or do you have to drill holes in the boat. thanks

Asked by: roddy
Neither. This comes with a transom mounted transducer which can be installed under the waterline, on the outside back wall of the boat, or you can take the bracket off of the transducer and use epoxy to install the transducer inside the bilge area, making sure that there are no air bubbles under the transducer, and it will shoot through the hull.
Answered by: Justin
Date published: 2015-09-23
  • y_2020, m_10, d_20, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_92748, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_gandermountain
  • bvseo_sdk, dw_cartridge, 17.1.0, p_sdk_3.2.0
  • CLOUD, getContent, 75ms
  • questions, product