CMC PT-130 Electric Hydraulic Tilt and Trim Without Gauge, For Up To 130 HP
Item No. 322661
CMC PT-130 Electric Hydraulic Tilt and Trim Without Gauge, For Up To 130 HP is rated
out of
5 by
6.
Details
https://www.ganderoutdoors.com/cmc-pt-130-electric-hydraulic-tilt-and-trim-without-gauge-for-up-to-130-hp-322661.html
CMC PT-130 Electric Hydraulic Tilt and Trim Without Gauge, For Up To 130 HP
$1,149.99
$1,299.99
Save $150.00
(
12% Off
)
Additional Freight charge of
$10.00
applies.
Additional Information
Features
Enjoy superior performance with this powerful, electric hydraulic tilt and trim from CMC. Experience better boat handling, more speed, and lower fuel consumption, while also saving your back with fingertip control. With 20° of trim and a total of 90° of tilt and trim, you can tuck your motor in so your boat planes smoother and faster. Once under way, change the angle of your motor for the best performance for your load and water conditions. Actuated with a totally waterproof electric hydraulic system that is rated at over 7,800 lbs. of thrust.
The PT-130 Tilt and Trim is rated for 130 hp motors and smaller. The 6" set back enhances boat stability and performance. Made of 1/2" 6061 T6 extruded aluminum with stainless steel fasteners. Standard B.I.A. bolt hole pattern. Four stainless steel motor mounting bolts included.
Show moreShow less
The PT-130 Tilt and Trim is rated for 130 hp motors and smaller. The 6" set back enhances boat stability and performance. Made of 1/2" 6061 T6 extruded aluminum with stainless steel fasteners. Standard B.I.A. bolt hole pattern. Four stainless steel motor mounting bolts included.
- Improved fuel efficiency
- 6" set back for better performance
- 90º of tilt and trim
- Rated for 130 hp and smaller motors
- Over 7,800 lbs. of thrust
Specs
Unit Weight | 43.30 lb |
---|---|
Brand | Cook Mfg. |
Reviews
Q & A
Enjoy superior performance with this powerful, electric hydraulic tilt and trim from CMC. Experience better boat handling, more speed, and lower fuel consumption, while also saving your back with fingertip control. With 20° of trim and a total of 90° of tilt and trim, you can tuck your motor in so your boat planes smoother and faster. Once under way, change the angle of your motor for the best performance for your load and water conditions. Actuated with a totally waterproof electric hydraulic system that is rated at over 7,800 lbs. of thrust.
The PT-130 Tilt and Trim is rated for 130 hp motors and smaller. The 6" set back enhances boat stability and performance. Made of 1/2" 6061 T6 extruded aluminum with stainless steel fasteners. Standard B.I.A. bolt hole pattern. Four stainless steel motor mounting bolts included.
Show moreShow less
The PT-130 Tilt and Trim is rated for 130 hp motors and smaller. The 6" set back enhances boat stability and performance. Made of 1/2" 6061 T6 extruded aluminum with stainless steel fasteners. Standard B.I.A. bolt hole pattern. Four stainless steel motor mounting bolts included.
- Improved fuel efficiency
- 6" set back for better performance
- 90º of tilt and trim
- Rated for 130 hp and smaller motors
- Over 7,800 lbs. of thrust
Unit Weight | 43.30 lb |
---|---|
Brand | Cook Mfg. |
Rated 1 out of
5
by
agape from
The product does not hold up.
The motor was infiltrated last year by the hydralic fluid and would not run. I purchased a seal kit from [...] last summer which fixed the problem until this summer shen the same thing happened again.[...]
Date published: 2008-10-04
Rated 5 out of
5
by
Rocken Ron from
Great
Installation was very easy! Hardest part was getting motor off transom (125 HP). Wires for switch were to short (19.5 Ft). Added about 5 feet. Works great. Like the product.
Date published: 2010-08-04
Rated 5 out of
5
by
JoeOvtTech from
Problem Resolution
This is a great unit. It will usually never have to be serviced or refilled over a period of time. It is a sealed unit.
Date published: 2008-10-24
Rated 5 out of
5
by
JRSDULY from
GREAT PRODUCT,
I have owned this product for 3 years . no problems .I LOVE IT.
Date published: 2011-05-10
Rated 5 out of
5
by
Jack from
Perfect fix
This product is exactly what I needed easy install works great
Date published: 2020-09-14
Rated 1 out of
5
by
Hank from
dead in the water
the actuator has a poor setup to change brushes or work on
Date published: 2011-08-01