Blue Sea DualBus 150-Amp Common Busbar - (5) #10-32 Screws, (2) 5/16"-18 Studs
Item No. 316331
Blue Sea DualBus 150-Amp Common Busbar - (5) #10-32 Screws, (2) 5/16"-18 Studs is rated
out of
5 by
1.
Details
https://www.ganderoutdoors.com/blue-sea-dualbus-150-amp-common-busbar---5-%2310-32-screws-2-516-18-studs-316331.html
Blue Sea DualBus 150-Amp Common Busbar - (5) #10-32 Screws, (2) 5/16"-18 Studs
$29.59
$32.99
Save $3.40
(
10% Off
)
Additional Information
Features
The Blue Sea DualBus 150-Amp Common Busbar combines negative and positive buses on one block. Tin-plated copper bus offers maximum conductivity and corrosion resistance. Snap-on polycarbonate cover that meets ABYC/USCG requirements for insulation. UL rated reinforced polycarbonate base resists high heat.
• Maximum Voltage Rating: 300V AC/48V DC
• Continuous Amperage: 130 Amps AC/150 Amps DC
• Terminal Screw: (5 per bus) #10-32
• Terminal Stud: (2 per bus) 5/16"-20
• Blue Sea part number: 2723
Show moreShow less
• Maximum Voltage Rating: 300V AC/48V DC
• Continuous Amperage: 130 Amps AC/150 Amps DC
• Terminal Screw: (5 per bus) #10-32
• Terminal Stud: (2 per bus) 5/16"-20
• Blue Sea part number: 2723
- Combines negative and positive buses on one block
- Tin-plated copper bus offers maximum conductivity
- Insulated snap-on cover meets ABYC/USCG standards
- Ul rated reinforced polycarbonate base
- Continuous rating: 130 Amps AC/150 Amps DC
Specs
Unit Weight | 0.70 lb |
---|---|
Brand | Blue Sea Systems |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Reviews
Q & A
The Blue Sea DualBus 150-Amp Common Busbar combines negative and positive buses on one block. Tin-plated copper bus offers maximum conductivity and corrosion resistance. Snap-on polycarbonate cover that meets ABYC/USCG requirements for insulation. UL rated reinforced polycarbonate base resists high heat.
• Maximum Voltage Rating: 300V AC/48V DC
• Continuous Amperage: 130 Amps AC/150 Amps DC
• Terminal Screw: (5 per bus) #10-32
• Terminal Stud: (2 per bus) 5/16"-20
• Blue Sea part number: 2723
Show moreShow less
• Maximum Voltage Rating: 300V AC/48V DC
• Continuous Amperage: 130 Amps AC/150 Amps DC
• Terminal Screw: (5 per bus) #10-32
• Terminal Stud: (2 per bus) 5/16"-20
• Blue Sea part number: 2723
- Combines negative and positive buses on one block
- Tin-plated copper bus offers maximum conductivity
- Insulated snap-on cover meets ABYC/USCG standards
- Ul rated reinforced polycarbonate base
- Continuous rating: 130 Amps AC/150 Amps DC
Unit Weight | 0.70 lb |
---|---|
Brand | Blue Sea Systems |

WARNING: Cancer and Reproductive Harm
For more information, go to www.P65Warnings.ca.gov/product.
Rated 5 out of
5
by
DWS1187 from
Blue Sea makes the best DualBus Bars
I have this device wired to my 12VDC battery to allow a common bus. All fused lines eventually lead back to this DualBus. It makes the wiring professional, and provides more than enough current for all the circuits tied in. I used this to wire my radios into, since you attach them directly to the battery. Also the cover keeps the terminal nice and protected from accidental shorts. Blue Sea Systems are you number one choice for this type of product. Thank you Overton's for carrying their products.
Date published: 2012-12-28